Industry News - BLCH Pneumatic Science and Technology Co. Ltd.

Choosing correct cylinder sensor (Part 1)

2022-12-31

Sensors are a means of providing feedback to a control system, so that the operating parameters of an application can be continually adjusted for optimal results. Pneumatic cylinder sensors can be used to measure various parameters. Their typical function in pneumatics is to detect the position of a

How to choose a correct solenoid valve ( Part 1)

2022-12-19

Solenoid valve selection guideBefore choosing a type of solenoid valve, sufficient information about the application must be gathered. This guide describes the key parameters for solenoid valves.Important InformationThese are the most important guidelines when selecting a solenoid valve. Keep these

Transparent Blue Red Black Flexible PU Pneumatic Tube

2022-12-16

Tubing typeWhen deciding how to choose your pneumatic fittings, you need also to determine what type and size of tubing or hose you will need, whether it is measured in metric or imperial sizes, and whether it’s made of metal or thermoplastic. And in the first instance, you need to differentiate bet

How to choose correct fittings according to the thread type

2022-12-13

Thread typeThread size is governed by standards, including BSP (British Standard Pipe) and NPT (National Pipe Thread), although there are many other international standards, and sometimes it depends on the industry and/or country of use. Thread size is always measured and formulated on the interior

Choose correct fittings according to the different types of fittings

2022-12-10

DIFFERENT TYPES OF FITTINGSFittings come in all shapes and sizes, and can be connected in a variety of ways. Shaped fittings ensure the effective design of a pneumatic system, with various unions and adaptors to reduce or increase the pipe diameter, or provide a neat continuity across fittings.The m

How to choose right cylinder

2022-12-01

Select the correct cylinder according to the following conditions:1. According to the type of cylinder:Choose the type of cylinder according to the working requirements and conditions. Use a heat-resistant cylinder in a high temperature environment. In a corrosive environment, the use of corrosion

How to select the right solenoid valve

2022-11-28

Solenoid valve selection should first follow the four principles of safety, reliability, applicability, economy, followed by six aspects of the field conditions (namely, pipeline parameters, fluid parameters, pressure parameters, electrical parameters, mode of action, special requirements to choose)

Manual of Air Source Treatment Unit

2022-11-20

1. There are two ways of filter drainage: differential pressure drainage and manual drainage. Manual drainage must be discharged before the water level reaches the level below the filter element.2. When adjusting the pressure, please pull up and rotate the knob before turning it, and press the knob

Pneumatic Introduction

2022-11-10

Pneumatic transmission and control technology, referred to as pneumatic, is the compressed air as the working medium to carry out energy and signal transmission, is to achieve a variety of production process, automatic control of a technology. It is an important part of fluid transmission and contr

How to choose correct pneumatic fittings

2022-11-05

Pneumatic fittings are required in any kind of pressurised gas system to link together sections of tubing, pipe or hose. They typically have tighter seals and are subject to lower pressure than hydraulic fittings, and are frequently found in pneumatic instrumentation and logic control systems, as we

Choose Correct Fitting Material

2022-11-05

Fitting materialWhen deciding how to choose the correct pneumatic fittings for your application, you should examine the different materials that are commonly used in order to determine their different physical properties, gas compatibility, and reaction to, for example, temperature changes.ALUMINIUM

NEWS