We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support forPneumatic Check Valve, Hydraulic Hand Valve, Metric Air Cylinders, Should you be interested in almost any goods, remember to truly feel totally free to get in touch with us for further facts or be sure to deliver us email right, we will reply you in just 24 hrs as well as the finest quotation are going to be provided. The product will supply to all over the world, such as, Oman, Myanmar, Russia, Iraq, Vietnam, Bangladesh, In order to carry out our goal of "customer first and mutual benefit" in the cooperation, we establish a specialist engineering team and a sales team to supply the best service to satisfy our customers' requirements. Welcome you to cooperate with us and join us. We have been your best choice.
In order to further implement the security work and improve the emergency handling capacity of the company’s production
Pneumatic fittings are required in any kind of pressurised gas system to link together sections of tubing, pipe or hose.
Congratulations to BLCH Pneumatic Technology Co., LTD. On May 27, 2017, the electric proportional valve ITV2050 series p
Advantages of pneumatic components: 1. Pneumatic device is simple in structure, light and easy to install and maintain.
Thread typeThread size is governed by standards, including BSP (British Standard Pipe) and NPT (National Pipe Thread), a
BLCH Pneumatic Science and Technology Co. Ltd was founded in August 2004, it is located in the YUEQING economic developm
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
The solenoid valve should be installed with the inlet port (usually marked as port 1) connected to the upstream flow and the outlet port (usually marked as port 2) connected to downstream. Some solenoid valves will also be marked with an arrow on the body indicating the direction the media should flow.
It works on the principle of electromagnetism. The electromagnetic field that creates the temporary magnetic field is energised when the relay's circuit detects the fault current. This magnetic field moves the relay armature to open or close connections.
A latching relay is a type of relay that can maintain its position without being continuously energized, which makes it useful in applications where power consumption needs to be minimized. It uses a magnetic mechanism to "latch" into position and hold that position until a new signal is received. This is typically accomplished by using two coils that operate in opposite directions, with one coil used to set the position of the relay and the other used to reset it. When the set coil is energized
Rusting, power failure, irregular pressure, missing equipment, an incorrect amount of voltage or current, dirt stuck in the system and corrosion are some of the possible reasons why a solenoid valve may not properly close or open.
Types of Hydraulic Cylinder Single Acting Cylinders. Double Acting Cylinders. Tie-Rod Cylinders. Welded Rod Cylinders. Telescopic Cylinders.
