Our target is to consolidate and improve the quality and service of existing products, meanwhile constantly develop new products to meet different customers' demands forQuick Connectors, Foot Control Valve, Differential Pressure Control Valve, We also ensure that your selection will be crafted with the highest quality and reliability. Please feel free to contact us for further information. The product will supply to all over the world, such as, Bulgaria, Bhutan, German, Belorussia, France, Poland, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
Pneumatic transmission and control technology, referred to as pneumatic, is the compressed air as the working medium to
Advantages of pneumatic components: 1. Pneumatic device is simple in structure, light and easy to install and maintain.
CONGLATULATION!The "Internal Pilot Guide of the Precision Pressure Reducing Valve" standard which was lead drafted by o
Dear friends and customers :we come back to work from holiday. We thank everyone for your support and trust in the pa
Tubing typeWhen deciding how to choose your pneumatic fittings, you need also to determine what type and size of tubing
Warm congratulations to BLCH Pneumatic, for the success of 350kWp distributed photovoltaic power generation project test
Solenoid valves are used wherever fluid flow has to be controlled automatically. They are being used to an increasing degree in the most varied types of plants and equipment. The variety of different designs which are available enables a valve to be selected to specifically suit the application in question.
The overall cost to replace the shift solenoid in an automatic transmission ranges from $200 to $500 for a single solenoid. If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700
How do you reset a solenoid valve? On regular solenoid valves, it can be switched back to the operating position by energizing the solenoid, while on solenoid valves with latch-lock function it will not be so. After being energized, the valve must be manually reset by pushing the reset-knob
The solenoid valve should be installed with the inlet port (usually marked as port 1) connected to the upstream flow and the outlet port (usually marked as port 2) connected to downstream. Some solenoid valves will also be marked with an arrow on the body indicating the direction the media should flow.
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
Rusting, power failure, irregular pressure, missing equipment, an incorrect amount of voltage or current, dirt stuck in the system and corrosion are some of the possible reasons why a solenoid valve may not properly close or open.
