Tubing typeWhen deciding how to choose your pneumatic fittings, you need also to determine what type and size of tubing
1. There are two ways of filter drainage: differential pressure drainage and manual drainage. Manual drainage must be d
Working environmentThe design of pneumatic fittings should allow the free flow of required air or gas without any oppor
Sensors are a means of providing feedback to a control system, so that the operating parameters of an application can be
Description of filter working principle:The compressed air from the inlet is strongly rotated through the tangential gap
In order to further implement the security work and improve the emergency handling capacity of the company’s production
It works on the principle of electromagnetism. The electromagnetic field that creates the temporary magnetic field is energised when the relay's circuit detects the fault current. This magnetic field moves the relay armature to open or close connections.
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
A solenoid is a device comprised of a coil of wire, the housing and a moveable plunger (armature). When an electrical current is introduced, a magnetic field forms around the coil which draws the plunger in. More simply, a solenoid converts electrical energy into mechanical work.
Types of Hydraulic Cylinder Single Acting Cylinders. Double Acting Cylinders. Tie-Rod Cylinders. Welded Rod Cylinders. Telescopic Cylinders.
The overall cost to replace the shift solenoid in an automatic transmission ranges from $200 to $500 for a single solenoid. If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700
A proportional control valve is a valve used to control fluid flow rate by varying the size of the flow passage via a restrictor. The regulated flow rate subsequently adjusts parameters affecting a process in a system, mainly level, pressure and temperature.
