Solenoid valve selection guideBefore choosing a type of solenoid valve, sufficient information about the application mus
Description of filter working principle:The compressed air from the inlet is strongly rotated through the tangential gap
Air source processing unit Air preparation AFR-BFR series Air FilterThe air source processing unit generally consists of
Working environmentThe design of pneumatic fittings should allow the free flow of required air or gas without any oppor
1. There are two ways of filter drainage: differential pressure drainage and manual drainage. Manual drainage must be d
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinde
In 2004, due to the persistence of the pneumatic industry, we established BLCH Pneumatic & Technology Co., Ltd. Suddenly
Types of Hydraulic Cylinder Single Acting Cylinders. Double Acting Cylinders. Tie-Rod Cylinders. Welded Rod Cylinders. Telescopic Cylinders.
The solenoid valve should be installed with the inlet port (usually marked as port 1) connected to the upstream flow and the outlet port (usually marked as port 2) connected to downstream. Some solenoid valves will also be marked with an arrow on the body indicating the direction the media should flow.
It works on the principle of electromagnetism. The electromagnetic field that creates the temporary magnetic field is energised when the relay's circuit detects the fault current. This magnetic field moves the relay armature to open or close connections.
Solenoid valves are used wherever fluid flow has to be controlled automatically. They are being used to an increasing degree in the most varied types of plants and equipment. The variety of different designs which are available enables a valve to be selected to specifically suit the application in question.
A latching relay is a type of relay that can maintain its position without being continuously energized, which makes it useful in applications where power consumption needs to be minimized. It uses a magnetic mechanism to "latch" into position and hold that position until a new signal is received. This is typically accomplished by using two coils that operate in opposite directions, with one coil used to set the position of the relay and the other used to reset it. When the set coil is energized
Relays are fundamental components in electrical and electronic circuits that provide an efficient means of controlling electrical power. They are used for a wide variety of purposes, including switching high-voltage or high-current circuits, as well as providing isolation and protection in complex systems. Relays have a simple but powerful working principle that makes them reliable, flexible, and versatile. In this article, we will discuss the working principle of relays in detail.
