Solenoid valve is an industrial equipment controlled by electromagnetism, is used to control the basic components of flu
Sports make people happy, sports make people healthy. In addition to busy work, we set up BLCH Running Team in 2022.
Since the second quarter of last year, with the recovery of global trade, international shipping prices continue to clim
In order to further implement the security work and improve the emergency handling capacity of the company’s production
Air source treatment is the component working by using the pressure of the gas or the expansion of the force. It Inclu
REED SENSORSReed sensors have been in use for many years and are the most common type used in pneumatic cylinders. They'
The overall cost to replace the shift solenoid in an automatic transmission ranges from $200 to $500 for a single solenoid. If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700
The solenoid valve should be installed with the inlet port (usually marked as port 1) connected to the upstream flow and the outlet port (usually marked as port 2) connected to downstream. Some solenoid valves will also be marked with an arrow on the body indicating the direction the media should flow.
Rusting, power failure, irregular pressure, missing equipment, an incorrect amount of voltage or current, dirt stuck in the system and corrosion are some of the possible reasons why a solenoid valve may not properly close or open.
How do you reset a solenoid valve? On regular solenoid valves, it can be switched back to the operating position by energizing the solenoid, while on solenoid valves with latch-lock function it will not be so. After being energized, the valve must be manually reset by pushing the reset-knob
Types of Hydraulic Cylinder Single Acting Cylinders. Double Acting Cylinders. Tie-Rod Cylinders. Welded Rod Cylinders. Telescopic Cylinders.
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
