Foot Check Valve- Suppliers Factory Manufacturers From China

Our Amazon Store is open, welcome to purchase from our store.

https://www.amazon.com/BLCH-Compressed-Regulator-Lubricator-Separator/dp/B09MFC6MC4/ref=sr_1_1?crid=RKI6I5FLO78N&keywords=B09MFC6MC4&qid=1652842550&refresh=1&sprefix=b09mfc6mc4%2Caps%2C249&sr=8-1

https://www.amazon.com/Compressed-Filter-Regulator-Combo-Three-Semi-Automatic/dp/B09MFCGN6N/ref=sr_1_1?crid=33RUET8W1KBI2&keywords=B09MFCGN6N&qid=1652842603&sprefix=b09mfc6mc4%2Caps%2C216&sr=8-1

https://www.amazon.com/BLCH-Compressed-Regulator-Piggyback-Semi-Automatic/dp/B09MLGDSY2/ref=sr_1_1?crid=2BS1D8KM798QS&keywords=B09MLGDSY2&qid=1652842635&sprefix=b09mfcgn6n%2Caps%2C238&sr=8-1

https://www.amazon.com/BLCH-Compressed-Regulator-Lubricator-Separator/dp/B09MFBF7KK/ref=sr_1_1?crid=30S9SRBB5UH4G&keywords=B09MFBF7KK&qid=1652842909&sprefix=b09mvlncwg%2Caps%2C219&sr=8-1

In order to further implement the security work and improve the emergency handling capacity of the company’s production staff, At  4 PM on May 21, BLCH Pneumatic Technology Co., Ltd. carried out fire emergency drill and training, and invited Yueqing Antong Safety Technology Service Co., Ltd. to participate in the on-site guidance.

Urgent notice: “the company first floor waste warehouse fire!”As the fire control room alarm sounded, the fire drill officially began.

The security team quickly closed the fire surrounding, and call 119 for support; The evacuation team guided the personnel to immediately implement the fire fighting, and finally the fire was under control, and the on-site personnel  were transferred in time. During the exercise, each teams responded positively, their responsibilities were clear, and the exercise procedure was well organized and orderly.

After the fire drill, we organized to learn the early fire fighting knowledge evacuation and escape knowledge and fire extinguishers and other fire equipment  correct operation method on the site.

The fire emergency exercise fully enhanced the awareness of fire safety of all the staff of the company, strengthened the knowledge of fire safety and the actual combat skills of the correct use of equipment.

Congratulations to BLCH Pneumatic Technology Co., LTD. On May 27, 2017, the electric proportional valve ITV2050 series products successfully passed the life test and will be on sale soon  

Electrical proportional valve is based on the size of the control signal to adjust the spool section area.  In order to achieve the adjustment of pressure size of the process objectives and requirements.  The flow control of electric proportional valve can be divided into two kinds.  One is switch control, one is continuous control, servo valve and other valve is different, its energy loss is greater, because it needs a certain amount of flow to maintain the work of the pre-stage control oil circuit.  One is switch control: either fully open, or fully closed, flow or maximum, or minimum, no intermediate state, such as ordinary electromagnetic through valve, electromagnetic directional valve, electro-hydraulic directional valve.  The other is continuous control: the valve port can be opened according to the need for any opening, so as to control the size of the flow, this kind of valve has manual control, such as throttle valve, also have electronic control, such as proportional valve, servo valve.  Electric proportional valve through electrical signals to control the gas pressure, can realize the continuous and stepless adjustment of the gas pressure, can realize remote control and program control, for the need for continuous or stepless adjustment of the gas pressure, especially suitable for the electrical proportional valve.

Features:

1) It can realize the stepless adjustment of pressure and speed, and avoid the impact phenomenon when the normally open switching valve changes direction.

2) It can realize remote control and program control.

3) Compared with discontinuous control, the system is simplified and the components are greatly reduced.

4) Compared with the hydraulic proportional valve, small size, light weight, simple structure, low cost, but the response speed is much slower than the hydraulic system, is also more sensitive to load changes.

5) The use of small power, less heat, low noise.

6) No fire, no pollution to the environment.  It is less affected by temperature changes.