Do you want to know the whole process of installing or changing the FRL unit? Every action taken in the process has its significance starting from the removal of the old unit and ending with the fitting of a new one. Just following a few simple steps would allow proper and clean air containing the required pressure to pass through your system. Ready to start each step? Be my guest.
1) What’s an FRL Air filter?
An FRL air filter is part of an FRL unit, which stands for Filter, Regulator, and Lubricator. This combo is super helpful for keeping air-powered (pneumatic) tools running their best. Here’s how it works:
● Filter: It cleans the compressed air by catching dust, water, and tiny debris. This is important because about 70% of problems in these systems come from dirty air.
● Regulator: It controls the air pressure, making sure your tools work smoothly without any hiccups.
● Lubricator: It adds a little bit of oil to the air to reduce friction, which helps your tools run better and need less maintenance—up to 30% less!
In short, an FRL unit keeps your pneumatic tools working efficiently, lasting longer, and staying in good shape.
2) Benefits of FRL Air Filter?
There are many benefits of using an FRL Air filter for your pneumatic system
+ Works Better: Helps your tools perform at their best.
+ Safer to Use: Clean, steady air makes everything safer.
+ Protect Tools: Keep your tools in good shape and lasting longer.
+ Lasts Longer: Your tools can last up to 50% longer with an FRL unit.
+ Steady Pressure: Keeps the air pressure just right so tools run smoothly.
+ Less Fixing Needed: Clean air means up to 30% less maintenance work.
+ Cleaner Air: It clears out dust and water, which helps avoid 70% of common tool problems.
3) Step-by-step guide to installing an FRL air filter?
| Step 1: Unpack the box and take out the plug. Check that you have all the parts you need! |  |
| Step 2: Wrap some PTFE tape around the pressure gauge threads. This helps stop leaks and keeps things efficient. |  |
| Step 3: Install the pressure gauge tightly. A secure fit means you’ll get accurate readings. |  |
| Step 4: Connect the slide valve to the FRL unit. Make sure it’s snug for good airflow. |  |
| Step 5: Use a wrench to tighten everything up. This helps prevent air leaks that can waste energy. |  |
| Step 6: Unscrew the oil cup and add some lubricant oil. This keeps everything running smoothly and can help your tools last longer. |  |
| Step 7: Install the FRL unit onto your equipment and let the compressed air flow in. |  |
| Step 8: Rotate the handle to regulate the pressure.It’s important to keep the right pressure for the best performance. |  |
| Step 9: Push down on the handle and check the pressure gauge to make sure it’s stable. |  |
| Step 10: After installation, test your equipment to ensure it’s working well. |  |
| Step 11: You might see moisture in the tube after some time. This is normal because of condensation. |  |
| Step 12: Manually drain any moisture to keep everything in good shape and prevent rust. |  |
➔ Conclusion
It is crucial to install an FRL air filter to keep your pneumatic system neat and functioning properly. Fulfilling the installation procedures guarantees a constant airflow, hence requiring less servicing and a longer tool lifespan. Well-regulated and filtered air makes everything function well.
BLCH is a world leader in pneumatic components. Our long-lasting FRL units provide the best performance to guarantee the safety of the equipment. By selecting BLCH, you are purchasing excellent goods that retain your pneumatic system operational and ramp up efficiency. Try the BLCH difference for your tools!
