REED SENSORSReed sensors have been in use for many years and are the most common type used in pneumatic cylinders. They'
Pneumatic fittings are required in any kind of pressurised gas system to link together sections of tubing, pipe or hose.
Our Amazon Store is open, welcome to purchase from our store. https://www.amazon.com/BLCH-Compressed-Regulator-Lubricato
Cylinder AccessoriesEven when a cylinder is sized properly, it may stroke too fast and require use of a flow control, ty
Dear all friends and customer,Happy Chinese New YearWe BLCH pneumatic Teamwish you lucky in the year of OXsafety & peace
The 133rd Canton Fair was reopened on April 15th. BLCH Pneumatic Company has returned to the exhibition stage again, wel
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
Types of Hydraulic Cylinder Single Acting Cylinders. Double Acting Cylinders. Tie-Rod Cylinders. Welded Rod Cylinders. Telescopic Cylinders.
The overall cost to replace the shift solenoid in an automatic transmission ranges from $200 to $500 for a single solenoid. If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700
The solenoid valve should be installed with the inlet port (usually marked as port 1) connected to the upstream flow and the outlet port (usually marked as port 2) connected to downstream. Some solenoid valves will also be marked with an arrow on the body indicating the direction the media should flow.
A proportional control valve is a valve used to control fluid flow rate by varying the size of the flow passage via a restrictor. The regulated flow rate subsequently adjusts parameters affecting a process in a system, mainly level, pressure and temperature.
A solenoid is a device comprised of a coil of wire, the housing and a moveable plunger (armature). When an electrical current is introduced, a magnetic field forms around the coil which draws the plunger in. More simply, a solenoid converts electrical energy into mechanical work.
