Cylinder AccessoriesEven when a cylinder is sized properly, it may stroke too fast and require use of a flow control, ty
BLCH Pneumatic Science and Technology Co. Ltd was founded in August 2004, it is located in the YUEQING economic developm
Solenoid valve is an automatic basic element used to control the direction of fluid, belonging to actuator; It is usuall
Solenoid valve selection should first follow the four principles of safety, reliability, applicability, economy, followe
Warm congratulations to BLCH Pneumatic, for the success of 350kWp distributed photovoltaic power generation project test
Thread typeThread size is governed by standards, including BSP (British Standard Pipe) and NPT (National Pipe Thread), a
Advantages of pneumatic components: 1. Pneumatic device is simple in structure, light and easy to install and maintain.
A solenoid is a device comprised of a coil of wire, the housing and a moveable plunger (armature). When an electrical current is introduced, a magnetic field forms around the coil which draws the plunger in. More simply, a solenoid converts electrical energy into mechanical work.
A proportional control valve is a valve used to control fluid flow rate by varying the size of the flow passage via a restrictor. The regulated flow rate subsequently adjusts parameters affecting a process in a system, mainly level, pressure and temperature.
Rusting, power failure, irregular pressure, missing equipment, an incorrect amount of voltage or current, dirt stuck in the system and corrosion are some of the possible reasons why a solenoid valve may not properly close or open.
The solenoid valve should be installed with the inlet port (usually marked as port 1) connected to the upstream flow and the outlet port (usually marked as port 2) connected to downstream. Some solenoid valves will also be marked with an arrow on the body indicating the direction the media should flow.
Solenoid valves are used wherever fluid flow has to be controlled automatically. They are being used to an increasing degree in the most varied types of plants and equipment. The variety of different designs which are available enables a valve to be selected to specifically suit the application in question.
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
