We usually keep on with the principle "Quality To start with, Prestige Supreme". We've been fully committed to offering our purchasers with competitively priced excellent solutions, prompt delivery and skilled support forPneumatic Cylinder Clamp, Water Solenoid Valve 12v, 2 Spool Hydraulic Control Valve, We are going to do our greatest to satisfy or exceed customers' prerequisites with excellent goods, advanced concept, and economical and timely company. We welcome all clients. The product will supply to all over the world, such as, Armenia, Liechtenstein, Romania, Bhutan, Thailand, Faroe Islands, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
1. There are two ways of filter drainage: differential pressure drainage and manual drainage. Manual drainage must be d
CONGLATULATION!The "Internal Pilot Guide of the Precision Pressure Reducing Valve" standard which was lead drafted by o
Cylinder AccessoriesEven when a cylinder is sized properly, it may stroke too fast and require use of a flow control, ty
Our Amazon Store is open, welcome to purchase from our store. https://www.amazon.com/BLCH-Compressed-Regulator-Lubricato
Description of filter working principle:The compressed air from the inlet is strongly rotated through the tangential gap
Congratulations to BLCH Pneumatic Technology Co., LTD. On May 27, 2017, the electric proportional valve ITV2050 series p
Pneumatic transmission and control technology, referred to as pneumatic, is the compressed air as the working medium to
One of the important parts of the pneumatic components is the cylinder. In order to ensure the normal use of the cylinder and avoid unnecessary situations, for the use of the pneumatic components and cylinder, let’s check the right way to use cylinder. When using the cylinder, the air quality requirements are very high. Clean, dry compressed air should be used. The air should not contain organic solvents, synthetic oils, salts, corrosive gases, etc., in order to avoid bottle and valve failure.
